1.4.24 -> 1.4.25 ---------------- - Fixed issue that prevented loading of some songs saved with TH-U VST2 up to 1.4.19 1.4.23 -> 1.4.24 ---------------- - Added Centuria overdrive stomp to Premium edition - Added possibility to toggle via MIDI the Direct Preset Recall setting - Show which one is the current setting for the "Initial sound chain" setting - Fixed appearance of standby switch on Made in Rock JimP amp 1.4.22 -> 1.4.23 ---------------- - Added support for future packs - ALT and SHIFT can be used during launch of the stand-alone app to start with default audio settings and sound chain, respectively 1.4.21 -> 1.4.22 ---------------- - Set Input Sensitivity to Low in the initial chain at factory settings - Fixed an audio level in the MF Dragon cabinet - Fixed a static "noise" that could happen in RockGuy Sustain 1.4.20 -> 1.4.21 ---------------- - Fixed regression that made it impossible to use the 4x12 RB Libra cabinet - Fixed regression that could cause TH-U not to start on macOS 10.10 or older 1.4.19 -> 1.4.20 ---------------- - Fixed issues with user-defined initial chain in Pro Tools - Added button to reset the initial chain to its factory default - Fixed issue that could cause new TH-U windows to open at minimum size - Fixed behavior of effect knobs when dragged using a touchscreen 1.4.18 -> 1.4.19 ---------------- - Added Tri-Chorus effect to TH-U Premium 1.4.17 -> 1.4.18 ---------------- - Fixed a possible hang on startup on macOS - Added support for future packs 1.4.16 -> 1.4.17 ---------------- - Bigger initial size for window of new plug-ins - Updated default mic models used in cabinets 1.4.15 -> 1.4.16 ---------------- - Added native Apple Silicon support to AAX plug-in - Added support for future packs - Fixed a rare condition that could lead to a crash on launch - Fixed a crash that could occour when replacing an amp with another - Fixed: D-Reverb was not affected by Reverb parameter in Master section 1.4.14 -> 1.4.15 ---------------- - Fixed USB authorization problems on macOS 13 Ventura - It's now possible to remove banks that are not authorized 1.4.13 -> 1.4.14 ---------------- - Fixed GH250 model becoming silent at 96 kHz - Added support for future packs - Internal code improvements 1.4.12 -> 1.4.13 ---------------- - Fix: "Clear Chain" button now also clears all scenes - Fix: unwanted fluttering effect in GH 250 model when placed after an overdrive 1.4.11 -> 1.4.12 ---------------- - New effects: PHASE STONE, Reverse Delay, ModulaVerb. Available as a free update in TH-U Premium - Clicking on the Current Preset display now reveals its position in bank and preset lists - The return to Scene A on preset load is now optional with a Setting - Clear Chain button: Don't ask confirmation if the chain is already empty - MIDI: Moving to previous/next bank now skips unlicensed banks - Overview: effect thumbnails are updated when their licensing state changes - SuperCabinet: Fixed EQ graph disappearing when effect bypass is toggled - LICENSE window: Fixed button reaction to mouse hover in on macOS 1.4.10 -> 1.4.11 ---------------- - Minor stability improvements 1.4.9 -> 1.4.10 --------------- - Fixed selection window not appearing (or crashing) when loading an IR in regular cabinets - Fixed possible crash on macOS stand-alone app when clicking "Bluetooth MIDI" in Audio Settings 1.4.8 -> 1.4.9 -------------- - Renewed factory presets - Windows: Fixed issue that hid TH-U behind other windows when maximized at launch - Add keyboard shortcuts for changing zoom - Fixed a potential issue of high CPU consumption in Volume Pedal 1.4.7 -> 1.4.8 -------------- - Added initial sound chain, used when opening new instances of TH-U. Fully customizable - Added CLEAR button to remove all effects from the current chain - Added 20 new presets to the TH-U Essentials factory bank - Fixed a mono-to-stereo bug in the RockGuy Chorus/Delay - Added a fix for a rare case of preset database corruption 1.4.6 -> 1.4.7 -------------- - Minor improvements for future compatibility 1.4.5 -> 1.4.6 -------------- - New model: Rotary (Premium edition only) - All new Parametric EQ, now with 4 bands and graphic display for frequency response - SuperCabinet: added options for IR export (sample rate, mono/stereo, length) - Keep previous versions of factory Banks alongside the new one - Fixed tuner always starting in Dot mode even when Bar is selected - Fixed a crash that could happen when using MIDI to change scenes and presets in LIVE mode - masOS installer no longer requires installation of Rosetta2 on Apple Silicon computers 1.4.4 -> 1.4.5 -------------- - Added Module Presets - Added preference for spillover on scene changes and effects ON/OFF - Added Ultra oversampling mode - Improved look and dsp processing of some models - Centred Splitter and Mixer in the viewport when they are the first inserted effects - Licensing status is updated immediately after authorization removal (fixes regression in 1.4.4) - macOS: don't list Time Machine snapshots as devices available for USB authorization - LICENSES window: clear field for serial number after successful authorization - Fixed: windows for exporting/saving files failed to appear on Windows if the target folder no longer existed 1.4.3 -> 1.4.4 -------------- - Added the possibility to demo Rig Libraries - Made LICENSES window open much faster when there are a lot of licenses - Used orange in DEMO window text to see at a glance which demos are in progress - Fixed a crash that could happen when opening the DEMO window - Fixed LICENSES window showing some licenses as active when they're not - Fixed Rig Player ON/OFF images to correctly reflect the state of the switches 1.4.2 -> 1.4.3 -------------- - Improved quality of SuperCabinet export - Added IMPORT button to add content from .THU files in addition to drag and drop - Fixed bug in behavior of "Bypass Wah at min position" option - Fixed SuperCabinet export being forbidden in some cases when should have been allowed instead 1.4.1 -> 1.4.2 -------------- - SuperCabinet: Added Z-Curve simulation - SuperCabinet: Added automatic level normalization - SuperCabinet: SHIFT-click on SOLO switches to add their slots to the SOLO - Add preference to toggle whether the sound chain can always scroll vertically 1.4.0 -> 1.4.1 -------------- - SuperCabinet is now easier to find in the list of components - Minor stability improvements 1.3.5 -> 1.4.0 -------------- - NEW: SuperCabinet (revolutionary IR processor) - New feature: multiple Editions can be demoed at the same time - Fixed issue in Apple DAWs on Apple Silicon when dragging effects into the chain - Fixed mono-to-stereo bug in the cabinet 1.3.4 -> 1.3.5 -------------- - Added new factory presets for TH-U Rock and TH-U Metal, and improved the existing ones - Show message when banks of factory presets are updated - Improved the DSP accuracy of the Modern amp model and Cat pedal model - Revamped look of some models 1.3.3 -> 1.3.4 -------------- - Added activity indicator on MIDI button - Improved "MIDI Learn" window - Looper: added MIDI and automation for a couple of parameters 1.3.2 -> 1.3.3 -------------- - New DEMO window: it is now possible to demo more than one Edition or Pack at the same time - Added support for 60s Pack - Reduced the CPU impact of recent cabinets on older processors - Fixed: Filter parameters in cabinets do not affect user IRs 1.3.1 -> 1.3.2 -------------- - Fixed: unavailable models no longer appear when replacing an effect - Fixed: right-clicking on Looper buttons to show their pop-up menu no longer triggers the button action - Fixed: when turning some effects on and off, Cakewalk DAWs no longer "stutter" - Slate-only: restored banks of factory presets that were missing in new installations 1.3.0 -> 1.3.1 -------------- - Slate-only: fixed a message requiring authorization to install a Rig Library when not actually needed 1.2.5 -> 1.3.0 -------------- - New feature: with SCENES, you can memorize multiple configurations of the effects in the chain, and recall them instantly. - New feature: regular cabinets can now load custom IRs - New feature: it is possible to change the microphone angulation in the cabinet - New feature: cabinet microphones can be panned - Improved cabinet IR processing with Fluid Convolution - Improved positioning of the chain when resizing and maximizing the window - Improved Rig Player response for high gain tones 1.2.2 -> 1.2.5 -------------- - Apple Silicon supported natively for Stand-alone app and AU, VST2, VST3 plug-in formats - Added search box for the products listed in the "Licenses" window - It is now possible to reinstall authorized Rig Libraries from the "Licenses" window - More robust retaining of tone control parameters when replacing amplifiers - Vibrato pedals now have the "Force mono" switch - Fixed a condition that could cause audible artifacts when replacing an effect - Fixed a potential problem when opening very old exported presets containing MIDI bindings - The currently viewed area of the chain is highlighted in the overview image - Various visual and usability improvements 1.2.1 -> 1.2.2 -------------- - Fixed potential crashes that could happen when loading old presets 1.2.0 -> 1.2.1 -------------- - Fixed an undesired slight scroll of the chain that could happen when inserting or replacing an effect - Windows-only, VST2-only: Fixed behaviour of ON setting for "Remastered Cabinet" in Master section 1.1.8 -> 1.2.0 -------------- - All new "Licenses" window, for easier authorization of products and Rig Libraries - Remastered cabinets: you can choose to keep their classic sound or use the modern one 1.1.7 -> 1.1.8 -------------- - Improved Rig Player loading speed - Improvements to support upcoming Rig Libraries - IR cabinet now supports IR format of ".ir" files used by predecessors of TH-U 1.1.6 -> 1.1.7 -------------- - Paste before/after are now also possible on Splitter and Mixer - Improved Rig Player modeling capabilities to be used by future Rig Libraries 1.1.5 -> 1.1.6 -------------- - Fixed inability to load 32-bit VST and VST3 formats in certain DAWs on Windows - Fixed crash happening when changing preset via MIDI while a TAP button is shown 1.1.4 -> 1.1.5 -------------- - Fixed: VST2 format in Ableton Live now recalls its saved state correctly 1.1.3 -> 1.1.4 -------------- - Restored compatiblity with macOS 10.10 Yosemite - Fixed Rig Player callout occasional misplacement - Improved UI with more descriptive messages in certain circumstances - Fixed PDF manual in places where text appeared trucated 1.1.2 -> 1.1.3 -------------- - Ensured compatiblity with macOS 10.15 Catalina - Added "Program" parameter in VST3 automation that selects presets in the current bank 1.1.1 -> 1.1.2 -------------- - Improved the Octaver model (and retained the previous one, for compatibility) - Rig Player: Rig lists retain their selections when reopening a DAW project - Rig Plater: Rig lists stay in sync when the Amp and Cab Rigs are Matched - Rig Player: new Rigs appear highlighted for two days after installation - Improved overall stability and user-friendliness 1.1.0 -> 1.1.1 -------------- - Rig Player: the list of rigs is shown when inserting the component - Rig and IR lists are sorted consistently with names in macOS and Windows folders - Fixed mismatching tooltips in Rig search results - Fixed possible silencing of the plug-in inside Pro Tools on Windows after few minutes - Fixed a crash that could happen on Windows with non-integer display scale when inserting a new Rig Player 1.0.20 -> 1.1.0 --------------- - Rig Player: listed Rigs are marked with a color hinting the gain amount - Rig Player: added search feature for Rigs - Cabinet IR: added more EQ parameters - Fixed: value displays now correctly appear when turning knobs on DVmark Triple Six 1.0.13 -> 1.0.20 ---------------- - Added Copy and Paste feature for components in the chain - Added MIDI input channel setting to stand-alone application - Rig Player: double click a knob to edit the value in the parameter's display - Slate and Overloud editions can now import each other's exported presets and banks 1.0.12 -> 1.0.13 ---------------- - Fixed a regression that could affect audio in certain conditions - Fixed loading issues in Pro Tools 2019 on Windows 1.0.10 -> 1.0.12 ---------------- - Added 3 new Rig Models by NRG - Restored displays for parameters in Darkface '65 and Bassface '59 1.0.9 -> 1.0.10 --------------- - Fixed an issue that could mute the plug-in after some minutes of usage 1.0.5 -> 1.0.9 -------------- - Darkface '65 and Bassface '59: improved UI realism - Fixed situation that could lead to unresponsive DAW when opening or closing a project 1.0.4 -> 1.0.5 -------------- - Installer: fixed an error message appearing at the end of a successful installation - Brunetti amps: removed a possible crackle from the Metropolitan - Brunetti amps: corrections to some names which didn't match the registered name - Rig Player: smoother transaction when switching between rigs 1.0.3 -> 1.0.4 -------------- - Rig Player: amplifier and cabinet can be loaded from two different rigs - Rig Player: added support for rigs with no cabinet - Rig Player: extended the range of the Presence parameter - Fixed a timeout occurring occasionally during plug-in scan by Cubase on Windows 1.0.2 -> 1.0.3 -------------- - Fixed crashes that could happen in Studio One on Windows when opening the Cabinet IR window or the list of Models in the Rig Player - Fixed ambience for cabinets not working in certain conditions - Fixed slow loading times when the IR folder contains thousands of files 1.0.0 -> 1.0.2 -------------- - Looper: added possibility to save the tracks to audio file - Cabinet IR: added support for short IRs in WAV format which could lead to a crash - Fixed a hang at startup that could happen under certain circumstances - Fixed: effects now regain full opacity after being dragged - Fixed: dragging a ZIP file that contains only a bank of presets now does not trigger the "Rig Model Library Installed" dialog window.